首页 星云 工具 资源 星选 资讯 热门工具
:

PDF转图片 完全免费 小红书视频下载 无水印 抖音视频下载 无水印 数字星空

532887-基于STM32单片机便携式气象雨滴雨量检测系统设计

硬件开发 21.16MB 27 需要积分: 1
立即下载

资源介绍:

STM32单片机便携式气象雨滴雨量检测系统125 本系统由STM32F103C8T6单片机核心板、雨滴液滴传感器、LCD1602液晶显示、 蜂鸣器报警、按键控制及电源组成。 1、通过传感器检测传感器实际值，并将传感器实际值显示在LCD1602液晶上。 2、感器检测采用的是AD数据转换，然后经过运算获得的。 3、三个按键设置阈值，分别为设置键、设置+、设置-，其中设置+、设置-只有在设置模式下才能进行操作。 4、在设置模式下，液晶有对应的显示标志，设置阈值存储到单片机Flash中，具有掉电不丢失，无需重新设置。
LM193, LM293, LM293A
LM393, LM393A, LM2903, LM2903V
DUAL DIFFERENTIAL COMPARATORS
SLCS005W − JUNE 1976 − REVISED JULY 2010
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
D Single Supply or Dual Supplies
D Wide Range of Supply Voltage
− Max Rating ...2 V to 36 V
− Tested to 30 V . . . Non-V Devices
− Tested to 32 V ...V-Suffix Devices
D Low Supply-Current Drain Independent of
Supply Voltage . . . 0.4 mA Typ Per
Comparator
D Low Input Bias Current . . . 25 nA Typ
D Low Input Offset Current ...3 nA Typ
(LM193)
D Low Input Offset Voltage ...2 mV Typ
D Common-Mode Input Voltage Range
Includes Ground
D Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage . . . ±36 V
D Low Output Saturation Voltage
D Output Compatible With TTL, MOS, and
CMOS
description/ordering information
These devices consist of two independent voltage
comparators that are designed to operate from a
single power supply over a wide range of voltages.
Operation from dual supplies also is possible as
long as the difference between the two supplies is
2 V to 36 V, and V
CC
is at least 1.5 V more positive than the input common-mode voltage. Current drain is
independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve
wired-AND relationships.
The LM193 is characterized for operation from −55°C to 125°C. The LM293 and LM293A are characterized for
operation from −25°C to 85°C. The LM393 and LM393A are characterized for operation from 0°C to 70°C. The
LM2903 is characterized for operation from −40°C to 125°C.
Copyright 2010, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
1
2
3
4
8
7
6
5
1OUT
1IN−
1IN+
GND
V
CC
2OUT
2IN−
2IN+
LM193 ...D OR JG PACKAGE
LM293 . . . D, DGK, OR P PACKAGE
LM293A ...D OR DGK PACKAGE
LM393, LM393A . . . D, DGK, P, PS, OR PW PACKAGE
LM2903 . . . D, DGK, P, PS, OR PW PACKAGE
(TOP VIEW)
3212019
910111213
4
5
6
7
8
18
17
16
15
14
NC
2OUT
NC
2IN−
NC
NC
1IN−
NC
1IN+
NC
LM193 ... FK PACKAGE
(TOP VIEW)
NC
1OUT
NC
2IN+
NC
V
NC
NC
GND
NC
CC
NC − No internal connection
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
LM193, LM293, LM293A
LM393, LM393A, LM2903, LM2903V
DUAL DIFFERENTIAL COMPARATORS
SLCS005W − JUNE 1976 − REVISED JULY 2010
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
ORDERING INFORMATION
{
T
A
V
IOmax
AT 25°C
MAX V
CC
PACKAGE}
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
PDIP (P) Tube of 50 LM393P LM393P
Tube of 75 LM393D
SOIC (D)
Reel of 2500 LM393DR
LM393
SOIC
(D)
Reel of 2500 LM393DRG3
LM393
5 mV 30 V
SOP (PS) Reel of 2000 LM393PSR L393
5
mV
30
V
Tube of 150 LM393PW
TSSOP (PW)
Reel of 2000 LM393PWR
L393
0°C to 70°C
TSSOP
(PW)
Reel of 2000 LM393PWRG3
L393
0 C
to
70 C
MSOP/VSSOP (DGK) Reel of 2500 LM393DGKR M9_
§
PDIP (P) Tube of 50 LM393AP LM393AP
SOIC (D)
Tube of 75 LM393AD
LM393A
2mV
30 V
SOIC (D)
Reel of 2500 LM393ADR
LM393A
2 mV 30 V
SOP (PS) Reel of 2000 LM393APSR L393A
TSSOP (PW) Reel of 2000 LM393APWR L393A
MSOP/VSSOP (DGK) Reel of 2500 LM393ADGKR M8_
§
PDIP (P) Tube of 50 LM293P LM293P
Tube of 75 LM293D
5 mV 30 V SOIC (D)
Reel of 2500 LM293DR
LM293
25°Cto85°C
5
mV
30
V
SOIC
(D)
Reel of 2500 LM293DRG3
LM293
−25°C to 85°C
MSOP/VSSOP (DGK) Reel of 2500 LM293DGKR MC_
§
SOIC (D)
Tube of 75 LM293AD
LM293A
2 mV 30 V
SOIC (D)
Reel of 2500 LM293ADR
LM293A
2
mV
30
V
MSOP/VSSOP (DGK) Reel of 2500 LM293ADGKR MD_
§
PDIP (P) Tube of 50 LM2903P LM2903P
Tube of 75 LM2903D
SOIC (D)
Reel of 2500 LM2903DR
LM2903
7V
30 V
SOIC
(D)
Reel of 2500 LM2903DRG3
LM2903
7 mV 30 V
SOP (PS) Reel of 2000 LM2903PSR L2903
40°C to 125°C
TSSOP (PW)
Reel of 2000 LM2903PWR
L2903
−40°C to 125°C
TSSOP (PW)
Reel of 2000 LM2903PWRG3
L2903
MSOP/VSSOP (DGK) Reel of 2500 LM2903DGKR MA_
§
7mV
32 V
SOIC (D) Reel of 2500 LM2903VQDR L2903V
7 mV 32 V
TSSOP (PW) Reel of 2000 LM2903VQPWR L2903V
2mV
32 V
SOIC (D) Reel of 2500 LM2903AVQDR L2903AV
2 mV 32 V
TSSOP (PW) Reel of 2000 LM2903AVQPWR L2903AV
CDIP (JG) Tube of 50 LM193JG LM193JG
−55°C to 125°C 5 mV 30 V
LCCC (FK) Tube of 55 LM193FK LM193FK
SOIC (D) Reel of 2500 LM193DR LM193
†
For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web
site at www.ti.com.
‡
Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
§
The actual top-side marking has one additional character that designates the wafer fab/assembly site.
LM193, LM293, LM293A
LM393, LM393A, LM2903, LM2903V
DUAL DIFFERENTIAL COMPARATORS
SLCS005W − JUNE 1976 − REVISED JULY 2010
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
symbol (each comparator)
IN+
IN−
OUT
schematic (each comparator)
80-µA
Current Regulator
80 µA
60 µA
10 µA
V
CC
10 µA
OUT
GND
IN+
IN−
Epi-FET
Diodes
Resistors
Transistors
Current values shown are nominal.
COMPONENT COUNT
1
2
2
30
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
†
Supply voltage, V
CC
(see Note 1) 36 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Differential input voltage, V
ID
(see Note 2) ±36 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage range, V
I
(either input) −0.3 V to 36 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output voltage, V
O
36 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output current, I
O
20 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Duration of output short-circuit to ground (see Note 3) Unlimited. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Package thermal impedance, θ
JA
(see Notes 4 and 5): D package 97°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . .
DGK package 172°C/W. . . . . . . . . . . . . . . . . . . . . . . .
P package 85°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . .
PS package 95°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . .
PW package 149°C/W. . . . . . . . . . . . . . . . . . . . . . . . .
Package thermal impedance, θ
JC
(see Notes 6 and 7): FK package 5.61°C/W. . . . . . . . . . . . . . . . . . . . . . . . .
JG package 14.5°C/W. . . . . . . . . . . . . . . . . . . . . . . . .
Operating virtual junction temperature, T
J
150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Case temperature for 60 seconds: FK package 260°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: JG package 300°C. . . . . . . . . . . . . . . . . . . .
Storage temperature range, T
stg
−65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to GND.
2. Differential voltages are at IN+, with respect to IN−.
3. Short circuits from outputs to V
CC
can cause excessive heating and eventual destruction.
4. Maximum power dissipation is a function of T
J
(max), θ
JA
, and T
A
. The maximum allowable power dissipation at any allowable
ambient temperature is P
D
= (T
J
(max) − T
A
)/θ
JA
. Operating at the absolute maximum T
J
of 150°C can affect reliability.
5. The package thermal impedance is calculated in accordance with JESD 51-7.
6. Maximum power dissipation is a function of T
J
(max), θ
JC
, and T
C
. The maximum allowable power dissipation at any allowable case
temperature is P
D
= (T
J
(max) − T
C
)/θ
JC
. Operating at the absolute maximum T
J
of 150°C can affect reliability.
7. The package thermal impedance is calculated in accordance with MIL-STD-883.
LM193, LM293, LM293A
LM393, LM393A, LM2903, LM2903V
DUAL DIFFERENTIAL COMPARATORS
SLCS005W − JUNE 1976 − REVISED JULY 2010
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
electrical characteristics at specified free-air temperature, V
CC
= 5 V (unless otherwise noted)
PARAMETER TEST CONDITIONS
T
A
†
LM193
LM293
LM393
UNIT
PARAMETER
TEST
CONDITIONS
T
A
†
MIN TYP MAX MIN TYP MAX
UNIT
V
Input offset voltage
V
CC
= 5 V to 30 V,
V 14V
25°C 2 5 2 5
mV
V
IO
Input offset voltage
V
O
= 1.4 V,
V
IC
= V
IC(min)
Full range 9 9
mV
I
Input offset current
V 14V
25°C 3 25 5 50
nA
I
IO
Input offset current V
O
= 1.4 V
Full range 100 250
nA
I
Input bias current
V 14V
25°C −25 −100 −25 −250
nA
I
IB
Input bias current V
O
= 1.4 V
Full range −300 −400
nA
V
Common-mode
25°C
0 to
V
CC
− 1.5
0 to
V
CC
− 1.5
V
V
ICR
Common mode
input voltage range
‡
Full range
0 to
V
CC
− 2
0 to
V
CC
− 2
V
A
VD
Large-signal
differential-voltage
amplification
V
CC
= 15 V,
V
O
= 1.4 V to 11.4 V,
R
L
≥ 15 kΩ to V
CC
25°C 50 200 50 200 V/mV
I
Hi
g
h-level
V
OH
= 5 V, V
ID
= 1 V 25°C 0.1 0.1 50 nA
I
OH
High level
output current
V
OH
= 30 V, V
ID
= 1 V Full range 1 1 µA
V
Low-level
V 1V
25°C 150 400 150 400
mV
V
OL
Low level
output voltage
I
OL
= 4 mA, V
ID
= −1 V
Full range
700 700
mV
I
OL
Low-level
output current
V
OL
= 1.5 V, V
ID
= −1 V 25°C 6 6 mA
I
Supply current
V
CC
= 5 V 25°C 0.8 1 0.8 1
mA
I
CC
Supply current R
L
= ∞
V
CC
= 30 V Full range 2.5 2.5
mA
†
Full range (MIN or MAX) for LM193 is −55°C to 125°C, for LM293 is 25°C to 85°C, and for LM393 is 0°C to 70°C. All characteristics are measured
with zero common-mode input voltage, unless otherwise specified.
‡
The voltage at either input or common-mode should not be allowed to go negative by more than 0.3 V. The upper end of the common-mode voltage
range is V
CC
+ − 1.5 V for the inverting input (−), and the non-inverting input (+) can exceed the V
CC
level; the comparator provides a proper output
state. Either or both inputs can go to 30 V without damage.
LM193, LM293, LM293A
LM393, LM393A, LM2903, LM2903V
DUAL DIFFERENTIAL COMPARATORS
SLCS005W − JUNE 1976 − REVISED JULY 2010
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
electrical characteristics at specified free-air temperature, V
CC
= 5 V (unless otherwise noted)
PARAMETER TEST CONDITIONS
T
A
†
LM293A
LM393A
UNIT
PARAMETER
TEST
CONDITIONS
T
A
†
MIN TYP MAX
UNIT
V
Input offset voltage
V
CC
= 5 V to 30 V, V
O
= 1.4 V,
25°C 1 2
mV
V
IO
Input offset voltage
V
CC
=
5
V
to
30
V
,
V
O
=
1
.
4
V
,
V
IC
= V
IC(min)
Full range 4
mV
I
Input offset current
V 14V
25°C 5 50
nA
I
IO
Input offset current V
O
= 1.4 V
Full range 150
nA
I
Input bias current
V 14V
25°C −25 −250
nA
I
IB
Input bias current V
O
= 1.4 V
Full range −400
nA
V
Common-mode input volta
g
e
25°C
0 to
V
CC
− 1.5
V
V
ICR
Common mode
input
voltage
range
§
Full range
0 to
V
CC
− 2
V
A
VD
Large-signal differential-voltage
amplification
V
CC
= 15 V, V
O
= 1.4 V to 11.4 V,
R
L
≥ 15 kΩ to V
CC
25°C 50 200 V/mV
I
High level output current
V
OH
= 5 V, V
ID
= 1 V 25°C 0.1 50 nA
I
OH
High-level output current
V
OH
= 30 V, V
ID
= 1 V Full range 1 µA
V
Low level output voltage
I 4mA
V 1V
25°C 150 400
mV
V
OL
Low-level output voltage I
OL
= 4 mA, V
ID
= −1 V
Full range
700
mV
I
OL
Low-level output current V
OL
= 1.5 V, V
ID
= −1 V 25°C 6 mA
I
Supply current
R = ∞
V
CC
= 5 V 25°C 0.8 1
mA
I
CC
Supply current R
L
= ∞
V
CC
= 30 V Full range 2.5
mA
†
Full range (MIN or MAX) for LM293A is 25°C to 85°C, and for LM393A is 0°C to 70°C. All characteristics are measured with zero common-mode
input voltage, unless otherwise specified.
§
The voltage at either input or common-mode should not be allowed to go negative by more than 0.3 V. The upper end of the common-mode voltage
range is V
CC+
− 1.5 V, but either or both inputs can go to 30 V without damage.

资源文件列表:

532887-基于STM32单片机便携式气象雨滴雨量检测系统设计.zip 大约有244个文件
  1. 功能说明.txt 468B
  2. 原理图.pdf 174.36KB
  3. 原理图.png 126.66KB
  4. AD原理图/原理图.pdf 174.36KB
  5. AD原理图/原理图.png 126.66KB
  6. AD原理图/原理图.SchDoc 80.5KB
  7. AD原理图/History/原理图.~(1).SchDoc.Zip 11.85KB
  8. AD原理图/History/原理图.~(2).SchDoc.Zip 9.83KB
  9. AD原理图/__Previews/原理图.SchDocPreview 77.53KB
  10. 器件清单列表/电路元器件清单列表 (1).xls 22.5KB
  11. 报告报告资料/设计说明文档 (1).doc 1.53MB
  12. 源程序代码/stm32-125、程序/keilkilll.bat 399B
  13. 源程序代码/stm32-125、程序/CORE/core_cm3.c 16.87KB
  14. 源程序代码/stm32-125、程序/CORE/core_cm3.h 83.71KB
  15. 源程序代码/stm32-125、程序/CORE/startup_stm32f10x_hd.s 15.14KB
  16. 源程序代码/stm32-125、程序/CORE/startup_stm32f10x_md.s 12.47KB
  17. 源程序代码/stm32-125、程序/HARDWARE/ADC/adc.c 2.75KB
  18. 源程序代码/stm32-125、程序/HARDWARE/ADC/adc.h 532B
  19. 源程序代码/stm32-125、程序/HARDWARE/KEY/key.c 561B
  20. 源程序代码/stm32-125、程序/HARDWARE/KEY/key.h 695B
  21. 源程序代码/stm32-125、程序/HARDWARE/LED/led.c 428B
  22. 源程序代码/stm32-125、程序/HARDWARE/LED/led.h 138B
  23. 源程序代码/stm32-125、程序/HARDWARE/STMFLASH/stmflash.c 3.73KB
  24. 源程序代码/stm32-125、程序/HARDWARE/STMFLASH/stmflash.h 1.54KB
  25. 源程序代码/stm32-125、程序/HARDWARE/TIMER/timer.c 2.41KB
  26. 源程序代码/stm32-125、程序/HARDWARE/TIMER/timer.h 661B
  27. 源程序代码/stm32-125、程序/OBJ/ADC.axf 407.71KB
  28. 源程序代码/stm32-125、程序/OBJ/ADC.build_log.htm 2.22KB
  29. 源程序代码/stm32-125、程序/OBJ/adc.crf 279.58KB
  30. 源程序代码/stm32-125、程序/OBJ/adc.d 768B
  31. 源程序代码/stm32-125、程序/OBJ/ADC.hex 46.24KB
  32. 源程序代码/stm32-125、程序/OBJ/ADC.htm 107.32KB
  33. 源程序代码/stm32-125、程序/OBJ/ADC.lnp 703B
  34. 源程序代码/stm32-125、程序/OBJ/adc.o 300.22KB
  35. 源程序代码/stm32-125、程序/OBJ/ADC.plg
  36. 源程序代码/stm32-125、程序/OBJ/ADC.sct 494B
  37. 源程序代码/stm32-125、程序/OBJ/ADC.tra 1.93KB
  38. 源程序代码/stm32-125、程序/OBJ/ADC_sct.Bak 479B
  39. 源程序代码/stm32-125、程序/OBJ/ADC_Target 1.dep 23.89KB
  40. 源程序代码/stm32-125、程序/OBJ/adxl345.crf 275.46KB
  41. 源程序代码/stm32-125、程序/OBJ/adxl345.d 752B
  42. 源程序代码/stm32-125、程序/OBJ/adxl345.o 296.43KB
  43. 源程序代码/stm32-125、程序/OBJ/core_cm3.crf 3.85KB
  44. 源程序代码/stm32-125、程序/OBJ/core_cm3.d 104B
  45. 源程序代码/stm32-125、程序/OBJ/core_cm3.o 11.37KB
  46. 源程序代码/stm32-125、程序/OBJ/delay.crf 279.17KB
  47. 源程序代码/stm32-125、程序/OBJ/delay.d 765B
  48. 源程序代码/stm32-125、程序/OBJ/delay.o 299.05KB
  49. 源程序代码/stm32-125、程序/OBJ/dht11.crf 273.17KB
  50. 源程序代码/stm32-125、程序/OBJ/dht11.d 693B
  51. 源程序代码/stm32-125、程序/OBJ/dht11.o 292.7KB
  52. 源程序代码/stm32-125、程序/OBJ/ds18b20.crf 273.66KB
  53. 源程序代码/stm32-125、程序/OBJ/ds18b20.d 752B
  54. 源程序代码/stm32-125、程序/OBJ/ds18b20.o 292.7KB
  55. 源程序代码/stm32-125、程序/OBJ/ExtDll.iex 19B
  56. 源程序代码/stm32-125、程序/OBJ/key.crf 278.74KB
  57. 源程序代码/stm32-125、程序/OBJ/key.d 729B
  58. 源程序代码/stm32-125、程序/OBJ/key.o 297.77KB
  59. 源程序代码/stm32-125、程序/OBJ/lcd.crf 327.48KB
  60. 源程序代码/stm32-125、程序/OBJ/lcd.d 977B
  61. 源程序代码/stm32-125、程序/OBJ/lcd.o 370.11KB
  62. 源程序代码/stm32-125、程序/OBJ/lcd1602.crf 282.76KB
  63. 源程序代码/stm32-125、程序/OBJ/lcd1602.d 788B
  64. 源程序代码/stm32-125、程序/OBJ/lcd1602.o 303.53KB
  65. 源程序代码/stm32-125、程序/OBJ/led.crf 278.59KB
  66. 源程序代码/stm32-125、程序/OBJ/led.d 729B
  67. 源程序代码/stm32-125、程序/OBJ/led.o 297.68KB
  68. 源程序代码/stm32-125、程序/OBJ/main.crf 288.27KB
  69. 源程序代码/stm32-125、程序/OBJ/main.d 1.04KB
  70. 源程序代码/stm32-125、程序/OBJ/main.o 312.96KB
  71. 源程序代码/stm32-125、程序/OBJ/misc.crf 278.22KB
  72. 源程序代码/stm32-125、程序/OBJ/misc.d 725B
  73. 源程序代码/stm32-125、程序/OBJ/misc.o 296.07KB
  74. 源程序代码/stm32-125、程序/OBJ/startup_stm32f10x_hd.d 63B
  75. 源程序代码/stm32-125、程序/OBJ/startup_stm32f10x_hd.o 6.78KB
  76. 源程序代码/stm32-125、程序/OBJ/stm32f10x_adc.crf 285.21KB
  77. 源程序代码/stm32-125、程序/OBJ/stm32f10x_adc.d 878B
  78. 源程序代码/stm32-125、程序/OBJ/stm32f10x_adc.o 309.92KB
  79. 源程序代码/stm32-125、程序/OBJ/stm32f10x_flash.crf 285.06KB
  80. 源程序代码/stm32-125、程序/OBJ/stm32f10x_flash.d 912B
  81. 源程序代码/stm32-125、程序/OBJ/stm32f10x_flash.o 306.42KB
  82. 源程序代码/stm32-125、程序/OBJ/stm32f10x_gpio.crf 281.63KB
  83. 源程序代码/stm32-125、程序/OBJ/stm32f10x_gpio.d 895B
  84. 源程序代码/stm32-125、程序/OBJ/stm32f10x_gpio.o 302.36KB
  85. 源程序代码/stm32-125、程序/OBJ/stm32f10x_it.crf 277.63KB
  86. 源程序代码/stm32-125、程序/OBJ/stm32f10x_it.d 791B
  87. 源程序代码/stm32-125、程序/OBJ/stm32f10x_it.o 296.58KB
  88. 源程序代码/stm32-125、程序/OBJ/stm32f10x_rcc.crf 285.12KB
  89. 源程序代码/stm32-125、程序/OBJ/stm32f10x_rcc.d 878B
  90. 源程序代码/stm32-125、程序/OBJ/stm32f10x_rcc.o 306.89KB
  91. 源程序代码/stm32-125、程序/OBJ/stm32f10x_tim.crf 299.77KB
  92. 源程序代码/stm32-125、程序/OBJ/stm32f10x_tim.d 878B
  93. 源程序代码/stm32-125、程序/OBJ/stm32f10x_tim.o 330.44KB
  94. 源程序代码/stm32-125、程序/OBJ/stm32f10x_usart.crf 283.69KB
  95. 源程序代码/stm32-125、程序/OBJ/stm32f10x_usart.d 912B
  96. 源程序代码/stm32-125、程序/OBJ/stm32f10x_usart.o 306.4KB
  97. 源程序代码/stm32-125、程序/OBJ/stmflash.crf 285.47KB
  98. 源程序代码/stm32-125、程序/OBJ/stmflash.d 981B
  99. 源程序代码/stm32-125、程序/OBJ/stmflash.o 305.71KB
  100. 源程序代码/stm32-125、程序/OBJ/sys.crf 278.36KB
  101. 源程序代码/stm32-125、程序/OBJ/sys.d 690B
  102. 源程序代码/stm32-125、程序/OBJ/sys.o 296.56KB
  103. 源程序代码/stm32-125、程序/OBJ/system_stm32f10x.crf 279.33KB
  104. 源程序代码/stm32-125、程序/OBJ/system_stm32f10x.d 812B
  105. 源程序代码/stm32-125、程序/OBJ/system_stm32f10x.o 296.48KB
  106. 源程序代码/stm32-125、程序/OBJ/timer.crf 279.29KB
  107. 源程序代码/stm32-125、程序/OBJ/timer.d 808B
  108. 源程序代码/stm32-125、程序/OBJ/timer.o 300.95KB
  109. 源程序代码/stm32-125、程序/OBJ/usart.crf 285.74KB
  110. 源程序代码/stm32-125、程序/OBJ/usart.d 865B
  111. 源程序代码/stm32-125、程序/OBJ/usart.o 305.98KB
  112. 源程序代码/stm32-125、程序/STM32F10x_FWLib/inc/misc.h 8.77KB
  113. 源程序代码/stm32-125、程序/STM32F10x_FWLib/inc/stm32f10x_adc.h 21.18KB
  114. 源程序代码/stm32-125、程序/STM32F10x_FWLib/inc/stm32f10x_bkp.h 7.38KB
  115. 源程序代码/stm32-125、程序/STM32F10x_FWLib/inc/stm32f10x_can.h 26.91KB
  116. 源程序代码/stm32-125、程序/STM32F10x_FWLib/inc/stm32f10x_cec.h 6.42KB
  117. 源程序代码/stm32-125、程序/STM32F10x_FWLib/inc/stm32f10x_crc.h 2.11KB
  118. 源程序代码/stm32-125、程序/STM32F10x_FWLib/inc/stm32f10x_dac.h 14.88KB
  119. 源程序代码/stm32-125、程序/STM32F10x_FWLib/inc/stm32f10x_dbgmcu.h 3.73KB
  120. 源程序代码/stm32-125、程序/STM32F10x_FWLib/inc/stm32f10x_dma.h 20.27KB
  121. 源程序代码/stm32-125、程序/STM32F10x_FWLib/inc/stm32f10x_exti.h 6.66KB
  122. 源程序代码/stm32-125、程序/STM32F10x_FWLib/inc/stm32f10x_flash.h 24.85KB
  123. 源程序代码/stm32-125、程序/STM32F10x_FWLib/inc/stm32f10x_fsmc.h 26.38KB
  124. 源程序代码/stm32-125、程序/STM32F10x_FWLib/inc/stm32f10x_gpio.h 19.7KB
  125. 源程序代码/stm32-125、程序/STM32F10x_FWLib/inc/stm32f10x_i2c.h 29.33KB
  126. 源程序代码/stm32-125、程序/STM32F10x_FWLib/inc/stm32f10x_iwdg.h 3.74KB
  127. 源程序代码/stm32-125、程序/STM32F10x_FWLib/inc/stm32f10x_pwr.h 4.28KB
  128. 源程序代码/stm32-125、程序/STM32F10x_FWLib/inc/stm32f10x_rcc.h 29.74KB
  129. 源程序代码/stm32-125、程序/STM32F10x_FWLib/inc/stm32f10x_rtc.h 3.77KB
  130. 源程序代码/stm32-125、程序/STM32F10x_FWLib/inc/stm32f10x_sdio.h 21.35KB
  131. 源程序代码/stm32-125、程序/STM32F10x_FWLib/inc/stm32f10x_spi.h 17.31KB
  132. 源程序代码/stm32-125、程序/STM32F10x_FWLib/inc/stm32f10x_tim.h 51.2KB
  133. 源程序代码/stm32-125、程序/STM32F10x_FWLib/inc/stm32f10x_usart.h 16.16KB
  134. 源程序代码/stm32-125、程序/STM32F10x_FWLib/inc/stm32f10x_wwdg.h 2.9KB
  135. 源程序代码/stm32-125、程序/STM32F10x_FWLib/src/misc.c 6.88KB
  136. 源程序代码/stm32-125、程序/STM32F10x_FWLib/src/stm32f10x_adc.c 46.09KB
  137. 源程序代码/stm32-125、程序/STM32F10x_FWLib/src/stm32f10x_bkp.c 8.26KB
  138. 源程序代码/stm32-125、程序/STM32F10x_FWLib/src/stm32f10x_can.c 44.05KB
  139. 源程序代码/stm32-125、程序/STM32F10x_FWLib/src/stm32f10x_cec.c 11.38KB
  140. 源程序代码/stm32-125、程序/STM32F10x_FWLib/src/stm32f10x_crc.c 3.27KB
  141. 源程序代码/stm32-125、程序/STM32F10x_FWLib/src/stm32f10x_dac.c 18.64KB
  142. 源程序代码/stm32-125、程序/STM32F10x_FWLib/src/stm32f10x_dbgmcu.c 5.03KB
  143. 源程序代码/stm32-125、程序/STM32F10x_FWLib/src/stm32f10x_dma.c 28.91KB
  144. 源程序代码/stm32-125、程序/STM32F10x_FWLib/src/stm32f10x_exti.c 6.8KB
  145. 源程序代码/stm32-125、程序/STM32F10x_FWLib/src/stm32f10x_flash.c 61.08KB
  146. 源程序代码/stm32-125、程序/STM32F10x_FWLib/src/stm32f10x_fsmc.c 34.65KB
  147. 源程序代码/stm32-125、程序/STM32F10x_FWLib/src/stm32f10x_gpio.c 22.68KB
  148. 源程序代码/stm32-125、程序/STM32F10x_FWLib/src/stm32f10x_i2c.c 44.71KB
  149. 源程序代码/stm32-125、程序/STM32F10x_FWLib/src/stm32f10x_iwdg.c 4.8KB
  150. 源程序代码/stm32-125、程序/STM32F10x_FWLib/src/stm32f10x_pwr.c 8.55KB
  151. 源程序代码/stm32-125、程序/STM32F10x_FWLib/src/stm32f10x_rcc.c 50.07KB
  152. 源程序代码/stm32-125、程序/STM32F10x_FWLib/src/stm32f10x_rtc.c 8.4KB
  153. 源程序代码/stm32-125、程序/STM32F10x_FWLib/src/stm32f10x_sdio.c 28.25KB
  154. 源程序代码/stm32-125、程序/STM32F10x_FWLib/src/stm32f10x_spi.c 29.52KB
  155. 源程序代码/stm32-125、程序/STM32F10x_FWLib/src/stm32f10x_tim.c 106.6KB
  156. 源程序代码/stm32-125、程序/STM32F10x_FWLib/src/stm32f10x_usart.c 37.41KB
  157. 源程序代码/stm32-125、程序/STM32F10x_FWLib/src/stm32f10x_wwdg.c 5.6KB
  158. 源程序代码/stm32-125、程序/SYSTEM/delay/delay.c 4.92KB
  159. 源程序代码/stm32-125、程序/SYSTEM/delay/delay.h 1.48KB
  160. 源程序代码/stm32-125、程序/SYSTEM/sys/sys.c 616B
  161. 源程序代码/stm32-125、程序/SYSTEM/sys/sys.h 2.65KB
  162. 源程序代码/stm32-125、程序/SYSTEM/usart/usart.c 7.43KB
  163. 源程序代码/stm32-125、程序/SYSTEM/usart/usart.h 1.29KB
  164. 源程序代码/stm32-125、程序/USER/ADC.map 114.51KB
  165. 源程序代码/stm32-125、程序/USER/ADC.uvgui.Administrator 89.21KB
  166. 源程序代码/stm32-125、程序/USER/ADC.uvgui_Administrator.bak 136.65KB
  167. 源程序代码/stm32-125、程序/USER/ADC.uvopt 15.48KB
  168. 源程序代码/stm32-125、程序/USER/ADC.uvproj 19.63KB
  169. 源程序代码/stm32-125、程序/USER/ADC_Target 1.dep 20.56KB
  170. 源程序代码/stm32-125、程序/USER/ADC_uvopt.bak 17.28KB
  171. 源程序代码/stm32-125、程序/USER/ADC_uvproj.bak 18.78KB
  172. 源程序代码/stm32-125、程序/USER/JLink Regs CM3.txt 497B
  173. 源程序代码/stm32-125、程序/USER/JLinkLog.txt 84.24KB
  174. 源程序代码/stm32-125、程序/USER/JLinkSettings.ini 578B
  175. 源程序代码/stm32-125、程序/USER/LCD1602.c 6.11KB
  176. 源程序代码/stm32-125、程序/USER/lcd1602.h 2.77KB
  177. 源程序代码/stm32-125、程序/USER/main.c 3.94KB
  178. 源程序代码/stm32-125、程序/USER/startup_stm32f10x_hd.lst 49.82KB
  179. 源程序代码/stm32-125、程序/USER/stm32f10x.h 619.11KB
  180. 源程序代码/stm32-125、程序/USER/stm32f10x_conf.h 3.19KB
  181. 源程序代码/stm32-125、程序/USER/stm32f10x_it.c 2.36KB
  182. 源程序代码/stm32-125、程序/USER/stm32f10x_it.h 1.94KB
  183. 源程序代码/stm32-125、程序/USER/system_stm32f10x.c 35.72KB
  184. 源程序代码/stm32-125、程序/USER/system_stm32f10x.h 2.04KB
  185. 电路PCB图/PCB图 (1).pdf 101.66KB
  186. 电路PCB图/PCB工程（AD软件打开） (1).PcbDoc 766.5KB
  187. 硬件模块资料/2.54单排座/2.54间距单排座.jpg 150.37KB
  188. 硬件模块资料/2.54单排针/2.54间距单排针.jpg 176.23KB
  189. 硬件模块资料/8050直插三极管/8050PCB封装图.JPG 24.67KB
  190. 硬件模块资料/8050直插三极管/8050三极管引脚介绍.JPG 13.3KB
  191. 硬件模块资料/8050直插三极管/8050原理图封装图.JPG 11.9KB
  192. 硬件模块资料/8050直插三极管/8050芯片手册.pdf 761.58KB
  193. 硬件模块资料/AMS1117-3.3芯片/AMS1117-3.3V芯片手册.pdf 860.71KB
  194. 硬件模块资料/AMS1117-3.3芯片/AMS1117-3.3芯片实物图.jpg 52.79KB
  195. 硬件模块资料/DC座/DC座原理图封装图.JPG 10.94KB
  196. 硬件模块资料/DC座/DC座实物图 (1).jpg 21.59KB
  197. 硬件模块资料/DC座/DC座实物图 (2).JPG 13.69KB
  198. 硬件模块资料/DC座/DC座（大）PCB封装图.JPG 28.21KB
  199. 硬件模块资料/DC座/DC座（小）PCB封装图.JPG 28.86KB
  200. 硬件模块资料/DX导线、焊锡丝/导线.jpg 130.4KB
  201. 硬件模块资料/DX导线、焊锡丝/焊锡丝.png 1.05MB
  202. 硬件模块资料/DZ直插电阻（色环电阻）/4.7欧姆2W直插电阻.jpg 156.5KB
  203. 硬件模块资料/DZ直插电阻（色环电阻）/电阻PCB封装图.JPG 16.96KB
  204. 硬件模块资料/DZ直插电阻（色环电阻）/电阻原理图封装图.JPG 3.92KB
  205. 硬件模块资料/DZ直插电阻（色环电阻）/色环电阻介绍.docx 145.66KB
  206. 硬件模块资料/DZ直插电阻（色环电阻）/色环电阻实物图.jpg 185.89KB
  207. 硬件模块资料/FC-37雨滴水滴传感器模块/FC-37雨滴水滴传感器模块.doc 553.5KB
  208. 硬件模块资料/FC-37雨滴水滴传感器模块/FC-37雨滴水滴传感器模块.jpg 235.58KB
  209. 硬件模块资料/FC-37雨滴水滴传感器模块/FC-37雨滴水滴传感器模块原理图.pdf 58.51KB
  210. 硬件模块资料/FC-37雨滴水滴传感器模块/LM393芯片手册.pdf 1.81MB
  211. 硬件模块资料/FC-37雨滴水滴传感器模块/雨滴传感器模块使用注意事项.mp4 2.32MB
  212. 硬件模块资料/JB胶棒/胶棒.jpg 154.03KB
  213. 硬件模块资料/JXDR极性电容/电解电容PCB图封装图.JPG 28.59KB
  214. 硬件模块资料/JXDR极性电容/电解电容介绍.docx 16.48KB
  215. 硬件模块资料/JXDR极性电容/电解电容原理图封装图.JPG 8.21KB
  216. 硬件模块资料/JXDR极性电容/电解电容实物图.jpg 33.03KB
  217. 硬件模块资料/JZ晶振/直插晶振介绍.JPG 77.6KB
  218. 硬件模块资料/JZ晶振/直插晶振实物图.jpg 66.6KB
  219. 硬件模块资料/KEY按键/2脚按键实物图.jpg 28.22KB
  220. 硬件模块资料/KEY按键/4脚按键PCB封装.JPG 25.97KB
  221. 硬件模块资料/KEY按键/4脚按键介绍.docx 44.43KB
  222. 硬件模块资料/KEY按键/4脚按键原理图封装.JPG 5.4KB
  223. 硬件模块资料/KEY按键/4脚按键实物图.jpg 194.15KB
  224. 硬件模块资料/LB蓝白电位器/蓝白电位器PCB封装.JPG 37.35KB
  225. 硬件模块资料/LB蓝白电位器/蓝白电位器原理图封装.JPG 6.81KB
  226. 硬件模块资料/LB蓝白电位器/蓝白电位器实物图.JPG 27.26KB
  227. 硬件模块资料/LCD1602液晶显示模块/LCD1602中文资料.pdf 663.15KB
  228. 硬件模块资料/LCD1602液晶显示模块/LCD1602液晶显示模块.doc 129.5KB
  229. 硬件模块资料/LCD1602液晶显示模块/LCD1602液晶显示模块.jpg 191.85KB
  230. 硬件模块资料/LCD1602液晶显示模块/LCD1602液晶显示模块注意事项.mp4 2.61MB
  231. 硬件模块资料/LED灯/LED灯PCB封装图.JPG 29.29KB
  232. 硬件模块资料/LED灯/LED灯原理图封装图.JPG 12.2KB
  233. 硬件模块资料/LED灯/LED灯实物图 (1).JPG 46.04KB
  234. 硬件模块资料/LED灯/LED灯实物图 (2).JPG 68.91KB
  235. 硬件模块资料/Power switch电源开关/电源开关PCB封装.JPG 27.56KB
  236. 硬件模块资料/Power switch电源开关/电源开关原理图封装.JPG 16.61KB
  237. 硬件模块资料/Power switch电源开关/电源开关实物图.png 93.64KB
  238. 硬件模块资料/STM32F103C8T6单片机核心板模块/STM32F103C8T6单片机核心板模块.doc 565.5KB
  239. 硬件模块资料/STM32F103C8T6单片机核心板模块/STM32F103C8T6芯片手册.pdf 1.06MB
  240. 硬件模块资料/STM32F103C8T6单片机核心板模块/样式1/STM32F103C8T6单片机核心板模块.jpg 178.99KB
  241. 硬件模块资料/STM32F103C8T6单片机核心板模块/样式1/STM32F103C8T6核心板电路图.pdf 536.21KB
  242. 硬件模块资料/STM32F103C8T6单片机核心板模块/样式2/STM32F103C8T6单片机核心板模块.jpg 51.87KB
  243. 硬件模块资料/STM32F103C8T6单片机核心板模块/样式2/STM32F103C8T6核心板原理图.pdf 518.23KB
  244. 硬件模块资料/USB电源线/USB电源线.JPG 77.84KB
0评论
提交 加载更多评论
其他资源 539039-基于STM32单片机0-5mA恒流源系统设计-电路设计
恒流源组成及方案说明
 EVPN二层双活现成配置
EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活现成配置EVPN二层双活
 Vic1.13.zip
Vic1.13.zip
 People Body Theories
People Body Theories
People Body Theories 436762-基于STM32闭环步进电机控制系统设计（仿真，程序，说明）
基于STM32闭环步进电机控制系统设计（仿真，程序，说明） （1） 基本功能:本任务通过输出脉冲控制步进电机的停止、运动、方向。使用 两个按键分别控制步进电机的正转和反转，再次按下这两个按键，步进电机停止， 同时 LCD 显示电机状态信息。 （2） 扩展功能:加入一个转速阈值设置功能，由电位器充当阈值设置器，可设 置目标转速并使电机接近设置的转速。
436762-基于STM32闭环步进电机控制系统设计（仿真，程序，说明） 436762-基于STM32闭环步进电机控制系统设计（仿真，程序，说明） 436762-基于STM32闭环步进电机控制系统设计（仿真，程序，说明）
STM32单片机车牌识别摄像头图像识别系统设计
本系统有STM32F103RCT6单片机核心板、2.8寸TFT液晶屏显示、摄像头图像采集OV7670、蜂鸣器、LED电路组成。 1、stm32单片机通过摄像头采集图像，并实时驱动TFT液晶屏显示相应图像。 2、stm32单片机通过模式识别、匹配货的车牌的识别结果，并在屏幕上进行显示。 3、识别主要过程包括图像采集、二值化分析、识别车牌区域、字符分割、字符匹配五个过程。 4、车牌锁定后会有蜂鸣器提醒，在分析获取到车牌后对车停留时间进行计时，并进行计费。 5、在图像采集界面，通过按键可以进入后台计费界面。在车牌识别后进入计费界面，可以通过按键退出计费界面，回到图像采集界面。 注意：单片机处理能力及速率有限，目前识别汉字：渝、辽、沪、浙、苏、粤，车牌图片一定要清晰，无反光，容易识别。 车牌识别操作技巧与按键功能说明： 1、重要一点，通过摄像头前面螺钮可以调焦，拧到直到液晶显示图像最清晰（一般我们调试好的）。 2、尽量让车牌号处于液晶中央位置，让车牌号内容处于两蓝线之间，且两蓝线处于红线上方。 3、位置合适后，进入倒计时，到时蜂鸣器会“嘀
STM32单片机车牌识别摄像头图像识别系统设计 STM32单片机车牌识别摄像头图像识别系统设计 STM32单片机车牌识别摄像头图像识别系统设计
529379-基于STM32无线蓝牙大棚温湿度监测控制系统设计
本设计由STM32单片机+风扇控制电路+温湿度传感器电路+1602液晶显示电路+蓝牙模块电路+电源电路组成。 1、通过温湿度传感器检测温湿度，并在液晶上和APP上实时显示。 2、当湿度超过75度，APP发出报警信息 3、通过APP发送指令“O”，风扇启动。 通过APP发送指令“C”，风扇关闭。
529379-基于STM32无线蓝牙大棚温湿度监测控制系统设计 GDE230 demo文件
GDE230 demo文件
本站由星云主机提供云计算服务

网站建设一条龙服务、小程序开发、企业网站建设、定制开发，网络安全检测与维护 业务合作联系QQ:九六九五七三七