## Example Summary
Empty project using DriverLib.
This example shows a basic empty project using DriverLib with just main file
and SysConfig initialization.
## Peripherals & Pin Assignments
| Peripheral | Pin | Function |
| --- | --- | --- |
| SYSCTL | | |
| DEBUGSS | PA20 | Debug Clock |
| DEBUGSS | PA19 | Debug Data In Out |
## BoosterPacks, Board Resources & Jumper Settings
Visit [LP_MSPM0G3507](https://www.ti.com/tool/LP-MSPM0G3507) for LaunchPad information, including user guide and hardware files.
| Pin | Peripheral | Function | LaunchPad Pin | LaunchPad Settings |
| --- | --- | --- | --- | --- |
| PA20 | DEBUGSS | SWCLK | N/A |
- PA20 is used by SWD during debugging
- `J101 15:16 ON` Connect to XDS-110 SWCLK while debugging
- `J101 15:16 OFF` Disconnect from XDS-110 SWCLK if using pin in application
|
| PA19 | DEBUGSS | SWDIO | N/A |
- PA19 is used by SWD during debugging
- `J101 13:14 ON` Connect to XDS-110 SWDIO while debugging
- `J101 13:14 OFF` Disconnect from XDS-110 SWDIO if using pin in application
|
### Device Migration Recommendations
This project was developed for a superset device included in the LP_MSPM0G3507 LaunchPad. Please
visit the [CCS User's Guide](https://software-dl.ti.com/msp430/esd/MSPM0-SDK/latest/docs/english/tools/ccs_ide_guide/doc_guide/doc_guide-srcs/ccs_ide_guide.html#sysconfig-project-migration)
for information about migrating to other MSPM0 devices.
### Low-Power Recommendations
TI recommends to terminate unused pins by setting the corresponding functions to
GPIO and configure the pins to output low or input with internal
pullup/pulldown resistor.
SysConfig allows developers to easily configure unused pins by selecting **Board**→**Configure Unused Pins**.
For more information about jumper configuration to achieve low-power using the
MSPM0 LaunchPad, please visit the [LP-MSPM0G3507 User's Guide](https://www.ti.com/lit/slau873).
## Example Usage
Compile, load and run the example.